Monitor Audio Monitor MRW-10 Subwoofer
Description
The Monitor MRW-10 boasts an array of features dedicated to optimising a home theatre system. There are three pre-set EQ mode settings (Music, Movie, Impact) to offer a level of adjustment for all rooms and tastes, and the controls use an advanced DSP based architecture to provide the ultimate in audio flexibility.
Monitor MRW-10 Key Features
- 10" MMP II long throw subwoofer driver
- Rigid MDF cabinet with rear porting
- Powerful 100 W Class D power amplifier – high efficiency and punchy bass delivery
- Switch mode power supply, designed to deliver high continuous rating and provides the instantaneous delivery of high current when required
- DSP processing with all control features and crossover performed in the digital domain
- Three pre-set EQ mode settings. Music / Movie / Impact
- 12 V trigger – provides switching control from AV amp, processor, or home automation control system
- 18 mm thick MDF construction
SPECIFICATIONS
System Format
Rear ported bass reflex cabinet
Lower Frequency Limit
30 Hz (-6 dB)
Upper Frequency Limit
Variable 50 – 120 Hz @ 24 dB/Octave
Amplifier Output
100 W RMS
Amplifier Classification
Class D with Switch mode PSU
Bass EQ Profiles
Music / Movie / Impact
Phase Control
0 – 180°
Auto Sensing
>3.5 mV
Input Level Requirements
Standby after approximately 15 minutes if no signal sensed
Drive Unit Complement
1 x 10" MMP II long throw driver
Input Impedance
>20 K ohms
Mains Input Voltage
110 – 120 Vac – 50 – 60 Hz
220 – 240 Vac – 50 – 60 Hz. Selectable
Fuse Specification
110 – 120 VAC – T4AL/250VAC
220 – 240 VAC – T4AL/250VAC
Connection
2 x Stereo RCA, 1 x LFE RCA connection
12 V trigger (3.5 mm mono mini-jack)
External Dimensions (Including Grille and Feet (H x W x D))
336 x 320 x 350.6 mm (131/4 x 125/8 x 1313/16")
Standby Power Consumption
<0.5 W standby
Weight
10.54 kg (23 lb 4 oz)